No overselling, no guesswork — just a Furnace Repair crew that diagnoses it right the first time. Same-day appointments available across Kent and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
Ask as many questions as you want; we'd rather over-explain than leave you unsure.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC grew one honest service call at a time in communities like Kent. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
We're not the biggest name in Kent — we're the company that tells you what actually needs fixing instead of what pads the ticket. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, residential or commercial.
Being local matters more than most companies let on. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Kent is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Kent rooftop unit. It also means faster escalation when something's urgent — a local dispatcher can reroute the nearest truck in minutes, not hours.
We cover the full range of heating, cooling, and air quality work Kent properties actually need.
When your Furnace Repair system fails without warning, waiting days for an appointment isn't an option. Our Kent dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Kent homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Most installs in Kent are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services light industrial and warehouse ventilation across Kent, with service agreements built around your operating hours.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Kent households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
If anything feels off after we leave, one call gets a tech back to your Kent address.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A tune-up often identifies exactly what's driving the extra energy use.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
Our techs recognize brand-specific quirks instead of learning your system on the job.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Kent area.
"I called three other companies first and this was the only one that actually picked up. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. Followed up a week later just to check everything was still running fine."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Documentation for our records was thorough and easy to file."
"The estimate matched the final invoice exactly, down to the dollar. My energy bill dropped noticeably the first month with the new system."
"Diagnosed a failed capacitor and had it swapped within the hour. Genuinely relieved to have found a crew that answers when it matters."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Kent's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Kent area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Kent roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
Our dispatch area extends throughout the greater Kent region and nearby towns within Kent, WA.
Property managers and business owners can request a dedicated point of contact for ongoing service.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Ask about financing during your in-home estimate to see what fits your situation.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Housing stock varies a lot across Kent — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Kent.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Kent installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Kent, WA and near Kent, there's a strong chance we already service your street.
Property managers with multiple Kent addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
